Professional die-cutting manufacturer 
 professional customization - more focused!

We dominate the world
A ray of sunshine in the morning
About Us
About Us
Not only quality, we are more perfect
Xiamen Nuoger New Materials Co., Ltd. is a production-oriented enterprise specializing in precision die-cutting and new material processing. We have a large number of advanced production equipment and calibration equipment, a 1500-square-meter ten-thousand-class clean worksho...
MORE+

Product

Innovative products are more than quality in pursuit of perfection

Neogor

Protective film die - cutting

Product Develop
0.6mm film small hole waste removal die-cutting
0.6mm film small hole waste removal die-cutting
The waste removal technology for small holes in 0.6mm thin films (especially for polytetrafluoroethylene, PTFE materials) has significant advantages in industrial filtration and separation processes. Its core value is reflected in aspects such as high - efficiency filtration, energy conservation and consumption reduction, and process adaptability.
  • +0.6 +0.6 mm
    film thickness
  • 0 0 emission
    Precision sewage interception
  • 3 3 year+
    film lifespan
  • -50 -50 %
    Precision sewage interception

Innovate manufacturing solutions for the die - cutting industry and contribute to a sustainable future

Simplify your processes,increase your productivity and maximise your profitability.
Ordinary die - cutting
Neogor die cutting
  • The accuracy of ordinary die - cutting machines is usually above ±0.1 mm.
    Micron-level tolerance control
    The stamping and die - cutting of 0.6 mm thin film can achieve a cutting accuracy of **±0.02 mm.
  • Ordinary die - cutting with 52° knives is likely to squeeze the material and cause burrs.
    No burrs and edge flatness
    Die-cutting with a 0.6 mm die can avoid the problems of flanging and burrs caused by the toughness of the film.
  • Ordinary die - cutting is prone to the breakage of the release paper and label dropping for films with a thickness of ≤0.1 mm
    Adapt to the characteristics of ultra-thin materials
    The thickness tolerance of the 0.6 mm thin film is extremely small (the thinning range ≤ 0.01 mm)
  • Ordinary devices rely on manual debugging, which is inefficient and has a high failure rate.
    Intelligent control and stability
    The 0.6mm die-cutting PLC touch control system can store 300 groups of parameters, automatically adjust the speed and pressure, and is equipped with infrared photoelectric protection to ensure continuous production in a clean room environment (with a speed of up to 35 times per minute).
  • Ordinary slitting machines are limited to ≤5,000 meters and have insufficient accuracy. The edge flatness is ±0.05 mm.
    Super-long coil slitting capacity
    The 0.6mm die-cutting supports slitting of ultra-long rolls up to 10,000 meters (such as 0.6 mm×10,000 m tape), and the edge flatness reaches ±0.05 mm.
  • The cost of ordinary die - cutting materials is high. Manual waste removal cannot control the accuracy, and it is easy to waste materials.
    The waste rate has decreased significantly.
    The 0.6mm die - cut double - cut film areas share one edge. Two products are formed in one stamping, reducing the waste of connecting edges and increasing the material utilization rate by 15% - 20%.

Case Study

Improving customer needs is our never ending pursuit

Whatsapp
Working time

Mon-Fri 09:00-18:00

Telephone:+86 15359283152

Email:Marketing@neogor.com

Address:No. 5, Fangshan South Road, Xiang'an District, Xiamen, Fujian Province, China.

Hotline
Hotline
+86 18359235876